Keyboard Check
Use this option to check the operation of the keyboard.
The program first checks the keyboard controller. If you specified to run the
keyboard check multiple times, only this part of the test is performed. If an
error message appears, write it down or print it out so you can contact your
Epson dealer when you complete the test.
If no errors are detected, the screen displays a diagram showing two types of
Enter
keys and this prompt:
Which shape is your ENTER key?
Enter selection number (1 or 2):
If
you have a U.S. keyboard, your
Enter
key should be rectangular, like the
key shown on the left. Press
1
and
Enter.
If you have a keyboard for
another country with an
Enter
key shaped like the key shown on the right,
press 2 and
Enter.
The screen then displays a diagram showing the layout of your keyboard. To
test the keyboard input, press any key on your keyboard. An asterisk (*)
should appear on the corresponding key in the diagram shown on the
screen.
You can test as many keys as you like this way. If the location of an asterisk
on the screen does not match the actual key you pressed, press the
End
key
and then press
Enter.
Write down the error message that appears, or print it
out, and contact your Epson dealer.
To end the test, press
E
SC
and then
Enter.
D-6
Performing
System Diagnostics
Summary of Contents for Equity Ie
