Epson EH-TW5400 User Manual Download Page 81

Page: 81 / 112

Troubleshooting

Indicators

Status

Explanation

(blue)

Ready

Wireless LAN is available.

(Flashing blue

quickly)

Connecting

Connecting to a device.

(Flashing blue

slowly)

Error

Wireless LAN error. Select

Off

as the

Wireless LAN Power

setting

in the projector's

Network

menu, and select

again.

If you cannot solve the problem, contact the following address.

Epson Projector Contact List

Starting

Wireless LAN Off

Wireless LAN connection is unavailable. Check that

Wireless

LAN Power

is set to

in the

Network

menu.

When the Indicators Provide No Help

Check the problem

Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.

Problem

Page

Problems relating to im-
ages

No images appear.

Projection does not start, the projection area is completely black, or
the projection area is completely blue.

p.81

Moving images being projected from a computer are not projected.

p.81

"Not supported"

is displayed.

p.82

"No Signal"

is displayed

p.82

Images are fuzzy or out of focus.

p.82

Interference or distortion appears in the images.

p.82

The image is truncated (large) or small, or only a part of the image is
projected.

p.83

Image colors are not right.

The whole image appears purplish or greenish, images are black &
white, or colors appear dull.

p.83

Images appear dark.

p.83

Projection stops automatically.

p.84

Problems when projection
starts

The projector does not turn on.

p.84

Problems with the remote
control

The remote control does not respond.

p.84

Problems with 3D

Cannot project correctly in 3D.

p.84

Summary of Contents for EH-TW5400

















































































































Search results

Summary of Contents for EH-TW5400

Reviews:

Related manuals for EH-TW5400

Brands by name

Popular brands

Epson EH-TW5400, User Manual

Search results

Summary of Contents for EH-TW5400

Reviews:

Related manuals for EH-TW5400

Brands by name

Popular brands