background image

Configuration Menu

70

Function

Menu/Settings

Explanation

Lock Setting

Child Lock

On, Off

This locks the 

 button on the

projector's control panel to prevent
children from turning on the pro-
jector by accident. You can turn on
the power when locked by holding
down the 

 button for approxi-

mately three seconds. You can still
turn off the device using the 
button, or perform operations with
the remote control as usual.
If changed, this setting is enabled
after you power off the projector
and the cool-down process is com-
plete.
Note that even if 

Child Lock

 is set to

On

, the projector still turns on when

the power cord is connected if 

Di-

rect Power On

 is set to 

On

.

Control Panel Lock

Full Lock, Partial Lock, Off

Full Lock

: Disables all of the projec-

tor's buttons.

Partial Lock

: Disables all of the pro-

jector's buttons except for the 
button.

 is displayed on the screen if but-

tons are pressed while the projector
is locked. To unlock, press and hold
the 

 button on the control panel

for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.

User Button

Fine/Fast, 2D-to-3D Conversion, Brightness Control, In-
fo, Display the QR Code (EH-TW5650 only)

Select a Configuration menu item to
assign to the 

 button on the re-

mote control. 

 button, the as-

signed menu item selection/adjust-
ment screen is displayed, allowing
you to make one-touch settings/ad-
justments.

Memory

Load Memory

Memory1 to Memory10

Loads the settings saved in Save
Memory to adjust the image.

Save Memory

Memory1 to Memory10

Saves the settings made in 

Image

 to

a memory.

Erase Memory

Memory1 to Memory10

Erases a saved memory.

Rename Memory

Memory1 to Memory10,
Default, DVD, VCR, SDTV,
HDTV, Cinema, Sports,
Music, Anime, Game, Cus-
tomized

Changes the saved memory name.

Summary of Contents for EH-TW5400

















































































































Reviews: