Density:
Sets the density of the outgoing fax. Press
r
to make the density darker, and press
l
to make it
lighter.
ADF Continuous Scan:
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as
one document at their original sizes. See the related information below on this topic.
Original Size (Glass):
Select the size and orientation of the original you placed on the scanner glass.
Color Mode:
Select whether to scan in color or in monochrome.
Related Information
&
“Sending Different Size Documents Using ADF (ADF Continuous Scan)” on page 88
Fax Send Settings
Select the menus on the control panel as described below:
Fax
>
Menu
>
Fax Send Settings
Direct Send:
Sends a monochrome fax while scanning the originals. Since scanned originals are not stored
temporarily in the printer's memory even when sending a large volume of pages, you can avoid
printer errors due to a lack of memory. Note that sending using this feature takes longer than not
using this feature. See the related information below on this topic.
You cannot use this feature when sending a fax to multiple recipients.
Send Fax Later:
Sends a fax at a time you specified. Only a monochrome fax is available when using this option. See
the related information below on this topic.
Add Sender Info:
Select the position where you want to include the header information (sender name and fax number)
in the outgoing fax, or not to include the information.
❏
Off
: Sends a fax with no header information.
❏
Outside of Image
: Sends a fax with header information in the top white margin of the fax. This
keeps the header from overlapping with the scanned image, however, the fax received by the
recipient may be printed across two sheets depending on the size of the originals.
❏
Inside of Image
: Sends a fax with header information approximately 7 mm lower than the top of
the scanned image. The header may overlap with the image, however, the fax received by the
recipient will not be split into two documents.
>
>
93
