An Image of the Reverse Side of the Original Appears in the Sent Fax
The following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
&
“Placing Originals on the Scanner Glass” on page 37
The density setting is high when sending faxes.
Solutions
Select
Fax
>
Menu
>
Scan Settings
>
Density
, and then lower the setting.
Received Fax Quality is Poor
The Image Quality of Received Faxes is Poor
Solutions
The following causes can be considered.
ECM setting is disabled.
Solutions
Select
Settings
>
Fax Settings
>
Basic Settings
and enable the
ECM
setting on the printer's control panel.
This may clear errors that occur due to connection problems. Note that the speed of sending and
receiving faxes may be slower than when
ECM
is disabled.
The image quality setting is low on the sender's fax machine.
Solutions
Ask the sender to send faxes at a higher quality.
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
The Quality of the Sent Fax is Poor
178