Code
Situation
Solutions
-
Turn the power off and on again. If
the problem persists, contact XX.
Try the following solutions.
1. Turn the printer off and on again.
2. If you are using a Wi-Fi connection, turn the wireless router off and
on again.
If the error message is still displayed, make a note of the error code,
and then contact Epson support.
-
The Ink Pad has reached the end of
its service life. Please contact Epson
Support.
The ink pad needs to be replaced. Contact Epson or an authorized
Epson service provider to replace the ink pad. It is not a user-
serviceable part.
If the ink pad has reached the end of its service life, you can no longer
perform cleaning. Printing can be performed but the quality of the
printouts cannot be guaranteed.
Recovery
Mode
The printer has started in recovery
mode because the firmware update
failed.
Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the firmware over a network
connection.)
2. Visit your local Epson website for further instructions.
*
In some print cycles a very small amount of surplus ink may be collected in the borderless printing ink pad. To prevent ink
leakage from the pad, the product is designed to stop borderless printing when the pad has reached its limit. Whether and
how often this is required will vary according to the number of pages you print using the borderless print option. The need
for replacement of the pad does not mean that your printer has ceased to operate in accordance with its specifications. The
printer will advise you when the pad requires replacing and this can only be performed by an authorised Epson Service
provider. The Epson warranty does not cover the cost of this replacement.
Paper Gets Jammed
Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces. Next, clear the error.
c
Important:
❏
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
❏
When removing jammed paper, avoid tilting the printer, placing it vertically, or turning it upside down;
otherwise ink may leak.
Removing Jammed Paper
You can also watch the procedure in the Web Movie Manuals. Access the following website.
https://support.epson.net/publist/vlink.php?code=NPD7019
!
Caution:
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
>
>
180