Extended Menu
103
• More than 20 minutes have passed after turning on the projector.
• The projectors to be adjusted are grouped.
• The projected images do not overlap or have gaps between them, and create
a rectangular image after tiling.
• Projection size is between 80 to 200 inches.
• All the projectors are connected to the same network and project images
with the same resolution.
• The Blend Range setting is set between 15 to 45%.
•
Projection
in the projector's
Extended
menu is set to
Front
or
Front/Ceiling
for all projectors.
Color Matching
s
Extended
>
Multi-Projection
>
Screen Matching
>
Color Matching
You can adjust the tint and brightness for the color tone from white to black.
During color matching, half of the overlapped area is displayed in black so
that you can check the edge of the image easily.
Adjustment Level
Select the adjustment level you want to adjust.
There are eight adjustment levels, from white to gray to black. Adjust each
level individually.
Set to
All
to adjust the tint for each color from level 2 to 8 in a batch.
(Once the values of red, blue, or green are at maximum or minimum at
any level, you cannot perform further adjustments.)
Red/Green/Blue
You can adjust the tone for each color.
Brightness
You can adjust the image brightness.
Simple Stacking
s
Extended
>
Multi-Projection
>
Simple Stacking
You can easily create a bright projected image by overlapping the images of
two projectors connected by wired LAN.
Point Correction
Adjust the image shape of the master projector. Select
Quick Corner
to
correct it roughly, and then select
Point Correction
to correct it in detail.
Start Auto Adjustment
You can automatically adjust the projected image using the external
camera.
The projector on which you perform this feature becomes the master
projector, and the images from other projectors are overlapped based on
the master projector's image.
a
• Connect two projectors directly using a LAN cable.
• Make sure you do the following before adjusting:
• Set the
DHCP
setting to
On
in the projector's
Network
menu for
two projectors.
s
Network
>
Network Configuration
>
Wired LAN
>
IP
Settings
• Adjust the image position, shape, and focus on the master
projector. If you adjust the image shape of the master projector,
use the
Point Correction
menu in the
Simple Stacking
setting.
• The required time for simple stacking varies depending on the
projector layout. It takes up to approximately 4 minutes.
• After completing the simple stacking process,
Display Background
is automatically set to
Black
.
s
Extended
>
Display
>
Display Background
• This function is not available when you use the following optional
lenses:
• ELPLL08
g
g
Related Links
