Extended Menu
101
You can project the same image from up to 15 projectors to create one large
image using the Tiling feature.
Tiling
When the optional external camera is installed, set to
Auto
to configure
tiling automatically.
If you do not install the optional external camera or tiling the images
automatically was unsuccessful, select
Manual
, and then select the
Layout
and
Location Setup
settings individually.
Layout
Select the number of rows and columns you are setting up.
Location Setup
Select the position of each projected image as follows:
•
Row Order
to layout the screens from top to bottom, starting with 1 at
the top, in sequential order.
•
Column Order
to layout the screens from left to right, starting with A
on the left, in alphabetical order.
Location Info
You can view the name, IP address, and ID of the projector you set.
a
• Make sure nothing is blocking the optional external camera while
performing automatic tiling.
• Do not change any of the projector names or IP addresses, or the
images will not be adjusted automatically.
• The auto tiling function is not available when you use the following
optional lenses:
• ELPLL08
g
g
Related Links
• "Tiling Using the Projector's Menu"
Edge Blending
s
Extended
>
Multi-Projection
>
Edge Blending
You can blend the border between multiple images to create a seamless
screen.
Edge Blending
Set to
Blending/Black Level
or
Black Level
to enable the Edge Blending
feature.
Top Edge/Bottom Edge/Right Edge/Left Edge
Select the edge you want to blend on each projector.
•
Blending
to turn on the Edge Blending feature for the selected edge.
Gradation is applied to the blending range.
•
Blend Start Position
to adjust the point where edge blending begins in 1
pixel increments. The blending start position is displayed with a red line.
•
Blend Range
to select the width of the blended area in 1 pixel
increments. You can select up to 45% of the projector's resolution.
•
Blend Curve
to select a gradient for the shaded area on the projected
image.
Line Guide
Set to
On
to display a guide on the blended area.
Pattern Guide
Set to
On
to display a grid to match the blended area.
Guide Color
Select a combination of guide colors.
a
•
Blend Start Position
,
Blend Range
,
Blend Curve
,
Line Guide
,
Pattern Guide
, and
Guide Color
are only available when
Edge
Blending
is set to
Blending/Black Level
.
• Set the
Color Mode
setting to
Multi-Projection
in the projector's
Image
menu for all of the projectors.
• When you adjust the blending area using another device such as a
media server, select
Black Level
.
Black Level
s
Extended
>
Multi-Projection
>
Black Level
