Multi-Projection Features
129
a
• You can change the number of the displayed points using the
Points
setting.
• To continue to move another point, press [Esc] and then
repeat the previous steps.
• To adjust another boundary line, press [Esc] until the screen is
displayed.
j
If you are combining images from multiple projectors on a network,
select the
Screen Matching
setting to adjust the brightness and tint of
the images.
a
The required time for screen matching varies depending on the
layout and number of projectors. It can take up to approximately
18 minutes.
k
If the projectors are not connected to a network or you want to adjust
manually after performing automatic adjustments, select the
Color
Matching
setting to adjust the brightness and tint of the images
manually.
• Select a value for the
Adjustment Level
setting, and adjust the color
tone for the
Red
,
Green
, or
Blue
settings, and then adjust the
Brightness
setting.
• Repeat these steps as necessary to adjust each adjustment level.
l
Select the
Scale
setting to select sections of the images.
• Set the
Scale
setting to
Auto
or
Manual
first.
• Select the
Scale Mode
setting and select one of the following options:
•
Zoom Display
to maintain the image aspect ratio as you scale the
image.
•
Full Display
to adjust the image to the projector's screen size as
you scale the image.
• Select one or more of the following scaling options and adjust it as
necessary:
• - or + to scale the image horizontally and vertically at the same
time.
