Settings Menu
87
a
You can turn on all remote receivers by holding down the [Menu]
button on the remote control for approximately 15 seconds.
User Button
s
Settings
>
User Button
You can assign the following menu options to the [User] buttons on the
remote control for one-touch access.
• Light Source Mode
• Multi-Projection
• Resolution
• On-Screen Display
• Display the QR Code
• Image Enhancement
• Frame Interpolation
• Link Menu
• Content Playback
• USB
a
The
USB
option is only displayed when
Content Playback
is set to
On
.
Test Pattern
s
Settings
>
Test Pattern
You can display a test pattern to assist in focusing and zooming the image and
correcting image shape.
a
• Press the [Page] button to change the test pattern while displaying a
test pattern.
• Press the [Esc] button to cancel pattern display.
• The test pattern's shape is determined by the
Screen Type
setting. Be
sure to set the correct screen type before adjusting with the test
pattern.
s
Extended
>
Display
>
Screen
>
Screen Type
• To set menu items that cannot be set while the test pattern is being
displayed or to fine-tune the projected image, project an image from
the connected device.
• You can also display a test pattern using the [Test Pattern] button on
the control panel or remote control.
Memory
s
Settings
>
Memory
You can save customized settings and then select the saved settings whenever
you want to use them.
Memory
You can save the following settings. You can register up to 10 memories
with different names.
•
Image
menu settings
•
Scale
in the
Signal
menu
•
Light Source Mode
and
Brightness Level
in the
Settings
menu
•
Edge Blending
,
Color Matching
, and
Black Level
in the
Extended
menu
Lens Position
You can save the position of the lens adjusted using lens shift, zoom, focus,
and distortion. You can register up to 10 memories with different names.
Geometry Correction
You can save the adjustment value of the geometry correction. You can
register up to 3 memories with different names.
You can use the following options for each memory type.
