Network Menu
113
Community Name
s
Network
>
Network Configuration
>
Notifications
>
Community Name
Enter the SNMP community name up to 32 alphanumeric characters long.
(Do not use spaces and any symbols other than @.)
PJLink Notification
s
Network
>
Network Configuration
>
Notifications
>
PJLink
Notification
Set to
On
to enable the PJLink notification function when the PJLink setting
is enabled.
Notified IP Address
s
Network
>
Network Configuration
>
Notifications
>
Notified IP
Address
Enter the IP address to receive the projector's operating status when the
PJLink notification function is enabled. Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Command Communication
s
Network
>
Network Configuration
>
Others
>
Command
Communication
You can select the authentication method for command communication.
Protected
Select when performing a digest authentication using
Web Control
Password
. You need to install the latest version of the Epson Projector
Management software.
Compatible
Select when performing plain text authentication using the Monitor
Password (up to 16 alphanumeric characters long).
a
Select
Compatible
when monitoring projectors with a switcher and a
system controller or using Epson Projector Management ver.5.30 or
earlier.
Secure HTTP
s
Network
>
Network Configuration
>
Others
>
Secure HTTP
To strengthen security, communication between the projector and computer
in Web control is encrypted. When setting security with Web control, it is
recommended to set this to
On
.
Web Server Certificate
s
Network
>
Network Configuration
>
Others
>
Web Server Certificate
Imports the Web server certificate for secure HTTP.
Web API Settings
s
Network
>
Network Configuration
>
Others
>
Web API Settings
You can select the Web API settings when using Web API communications.
Web API
Set to
On
to enable the Web API function.
