Extended Menu
95
User's Logo
s
Extended
>
User's Logo
You can save an image on the projector and display it whenever the projector
turns on. You can also display the image when the projector is not receiving
an input signal. This image is called the user's logo screen.
You can select a photo, graphic, or company logo as the user's logo, which is
useful in identifying the projector's owner to help deter theft. You can prevent
changes to the user's logo by setting up password protection.
Display the image you want to project as the user's logo and then select this
setting.
a
• If the
User's Logo Protection
setting in the
Password Protection
setting menu is set to
On
, set to
Off
before saving the user's logo.
• When you copy the menu settings from one projector to another
using the batch setup feature, user's logo is also copied. Do not
register the information that you do not want to share between
multiple projectors as a user's logo.
• You cannot save content that is protected by HDCP.
• When
Content Playback
is set to
On
, you can display the user's logo
only when the projector starts up.
• Adjustments for image shape and display range are temporarily
canceled when you select
User's Logo
.
Projection
s
Extended
>
Projection
You can set the way the projector faces the screen so the image is oriented
correctly.
a
You can change the projection mode to flip the image over top-to-
bottom by holding down the [A/V Mute] button on the remote control
for approximately 5 seconds.
Direct Power On
s
Extended
>
Operation
>
Direct Power On
Set to
On
to turn on the projector by plugging it in without pressing the
power button.
Note that the projector also turns on automatically in cases such as recovery
from a power outage.
Sleep Mode
s
Extended
>
Operation
>
Sleep Mode
Set to
On
to automatically turns off the projector after an interval of
inactivity.
Sleep Mode Timer
s
Extended
>
Operation
>
Sleep Mode Timer
You can set the time before the projector automatically turns off from 1 to 30
minutes.
a
This function is enabled only when
Sleep Mode
is set to
On
.
High Altitude Mode
s
Extended
>
Operation
>
High Altitude Mode
When operating the projector at an altitude where the air is thin, the normal
rotation speed of the fans is not enough to cool the projector.
Set to
On
to increase the rotation speed of the fans at altitudes above 1500 m.
