Extended Menu
104
• "Stacking Using the Projector's Menu"
Conditions for Simple Stacking
You can use the simple stacking feature under the following conditions:
• An optional external camera or a built-in camera is installed on each
projector.
• Wait for 2 minutes after turning on two projectors before starting the
simple stacking process.
• You are projecting on a matte white diffusion screen that is flat and even.
• The projector is placed so it squarely faces the screen, not at an angle.
• Nothing is blocking the optional external camera and the projected image.
• The illuminance ratio on the screen surface when projecting an all-white
screen and when projecting an all-black screen is 8:1 or more. (When the
screen illuminance is 40 lux or less, the projection size within the following
range is recommended.)
• Up to 9.9 Klm: 50 to 200 inches
• 10 Klm to 14.9 Klm: 60 to 300 inches
• 15 Klm to 19.9 Klm: 70 to 350 inches
• 20 Klm to 24.9 Klm: 80 to 400 inches
• 25 Klm to 29.9 Klm: 90 to 450 inches
• 30 Klm or more: 100 to 500 inches
• The original resolution of all the projector is same.
•
Projection
in the projector's
Extended
menu is set to
Front
or
Front/Ceiling
for all projectors.
Schedule Settings
s
Extended
>
Schedule Settings
s
Extended
>
Multi-Projection
>
Screen Matching
>
Schedule Settings
You can schedule various projector tasks.
Schedule/Extended Schedule
Select
Add New
to schedule events. To save your events, select
Setup
complete
and then select
Yes
.
•
Event Settings
to select the event details you want to perform. Select
No
Change
for items that you do not want to change when the event occurs.
•
Date / Time Settings
to select the date and time at which you want the
event to occur. You can schedule events up to 4 weeks later.
Schedule Reset
You can delete all scheduled events. To delete events completely, you need
to select
Setup complete
and select
Yes
.
Setup complete
Saves your changes in the
Schedule Settings
menu.
Warning
Do not place flammable objects in front of the lens. If you schedule the projector
to turn on automatically, flammable objects in front of the lens could catch on a
fire.
a
• In the
Schedule
menu, you can schedule up to 30 events.
• In the
Extended Schedule
menu, you can schedule only one event
for
Color Calibration
or
Screen Matching
.
• Light Source Calibration events do not start if the projector is used
continuously for more than 24 hours, or regularly turned off by
turning off the power outlet. Set the following events:
• Turning on the projector 20 minutes before performing light
source calibration.
• Performing light source calibration periodically.
g
g
Related Links
Schedule Status Icons
The icons in the calender are described in the following table.