Caution:
To adjust the fop-of-form position when labels are loaded in the
printer, use the forward-feeding (top)
MICRO FEED
button
only; do not enter the top-of-form mode. (See "Adjusting the
printing position” later in this chapter.) Never feed labels
backward through the printer.
1.
2.
3.
4.
Make sure the printer is turned on and the desired tractor is
selected (the corresponding tractor arrow should be lit).
Press the
TOP OF FORM
button to enter top-of-form mode.
The printer beeps once, and the
TOP OF FORM
light
flashes. Also, the printer advances the paper so that the
top-of-form position is lined up with the red line on the
clear plastic ribbon protector.
Open the top cover.
Use the
MICRO FEED
buttons to feed the paper to the
desired top-of-form position. The to pedge of the ribbon
protector shows you where the bottom edge of your first
line of text will print. This position is based on the first
printable line of text. If your software inserts a top margin
of five lines, your text will actually print five lines below
the top-of-form position.
2-12
Loading and Using Paper
Summary of Contents for DFX-5000+
