Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) User Manual Download Page 158

Page: 158 / 266

146

Settings for NetWare Server

R4CB110
User’s Guide

Rev.C

SETNW.fm

A5 size

8/21/03

Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee

17. In the Print Server dialog box, select the assigned printer from

the printer object list, and click the

Printer Number

button to

set the printer number from 0 to 15, then click

18. To confirm the objects you have assigned, double-click the

Print Server object icon. Click

Print Layout

, and check that the

print server, printer, and print queue are connected.

Configuring for NetWare using EpsonNet WinAssist

1. Turn on your printer.

2. Load the print server from the file server’s system console

which the print queue volume is set.
>LOAD PSERVER print server name you set using
PCONSOLE

3. Configure the print server using EpsonNet WinAssist. See

“NetWare” on page 63 for details.

If NetWare objects are already created, you can also use
EpsonNet WebAssist. See “NetWare” on page 211 for details.

Using NDS Remote Printer Mode (NetWare
4.x/5.x/6.0)

Follow the steps below to make the printer environment using
NWAdmin under NetWare 4.x, IntranetWare, NetWare 5.x, or
NetWare 6.0 with NDS mode.

Creating objects

1. From any NetWare client, log in to the target context of the

NDS tree as an ADMIN.

2. Run the Administrator tool (NWAdmin).

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)











































































































































































































































































Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands

Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server), User Manual

Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands