manualshive.com logo in svg

Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server), User Manual

The Epson C12C824052 is a high-speed internal Type-B Ethernet Print Server. To ensure seamless connectivity, this product allows easy integration into your existing network. Looking for its user manual? You can conveniently download it for free from our website, providing you with all the necessary instructions and information.

Share
Download
background image

244

Tips for Administrator

R4CB110
User’s Guide

Rev.C

TIPS.fm

A5 size

8/21/03

L

Proof Sign-off:
KOW  M. Arai  H. Tomizawa
K. Nishi
NOC  K. Lee

Setting an IP Address Using the arp/ping 
Command

If you are using UNIX or OS/2, you need to use the arp and ping 
command to set the IP address of the print server. You can also 
use these commands with Windows Me/98/95/XP/Server 
2003/2000/NT 4.0, if you have correctly installed TCP/IP 
networking on these systems.

Note:

❏

Make sure that the 

Set using PING

 function is enabled on the 

TCP/IP menu in EpsonNet WinAssist or EpsonNet WebAssist. If 
this function is disabled, you cannot set the IP address using the 
arp/ping command.

❏

Make sure the print server and the computer are in the same 
segment.

Before you start, you need the following information:

❏

A valid IP address for the print server. Ask your network 
administrator for an IP address which does not cause conflicts 
with any other device on the network. If you are the network 
administrator, choose an address within your subnet which 
does not conflict with any other device.

❏

The MAC (Ethernet hardware) address of the print server. 
You can find out the MAC address on a status sheet.

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)











































































































































































































































































Reviews:

No comments

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Magicard Prima Brochure preview
Prima
Brand: Magicard Pages: 6
Olivetti PG L2035 Quick Installation Manual preview
PG L2035
Brand: Olivetti Pages: 16
ACTi ACD-2200 Quick Installation Manual preview
ACD-2200
Brand: ACTi Pages: 15
xFusion Digital Technologies FusionServer CH242 V5 Manual preview
FusionServer CH242 V5
Brand: xFusion Digital Technologies Pages: 61
Oki LP470s Manual Rapide preview
LP470s
Brand: Oki Pages: 140
Tally t2145 Operator'S Manual preview
t2145
Brand: Tally Pages: 106
NEC Express5800/320Fa-L User Manual preview
Express5800/320Fa-L
Brand: NEC Pages: 406
Pathos Acoustics Musiteca Operating Instructions Manual preview
Musiteca
Brand: Pathos Acoustics Pages: 26
IBM Netfinity 1000-8477 21Y Hardware Maintenance Manual preview
Netfinity 1000-8477 21Y
Brand: IBM Pages: 268
d3 Technologies d3 4x4pro Quick Start Manual preview
d3 4x4pro
Brand: d3 Technologies Pages: 10
Kyocera Mita 1900N - B/W Laser Printer Operation Manual preview
1900N - B/W Laser Printer
Brand: Kyocera Mita Pages: 286
ICP DAS USA UA-5231M Quick Start preview
UA-5231M
Brand: ICP DAS USA Pages: 4
Oakton 35622 Series Operating Instructions Manual preview
35622 Series
Brand: Oakton Pages: 8
xFusion Digital Technologies FusionServer G5500 V6 Manual preview
FusionServer G5500 V6
Brand: xFusion Digital Technologies Pages: 100
Supermicro 7044H-T User Manual preview
7044H-T
Brand: Supermicro Pages: 118
MAXPhotonics E1-10W User Manual preview
E1-10W
Brand: MAXPhotonics Pages: 24
Sun Microsystems Sun Fire Netra 1280 Product Notes preview
Sun Fire Netra 1280
Brand: Sun Microsystems Pages: 10
Obvius, LLC AcquiLite A7810-0 Installation And Operation Manual preview
AcquiLite A7810-0
Brand: Obvius, LLC Pages: 29

Brands by name

Popular brands

Load more brands