2
How to Set Up the Print Server
33
R4CB110
User’s Guide
Rev.C
Start.fm
A5 size
8/21/03
R
Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee
2
2
2
2
2
2
2
2
2
2
2
7. Check the lights on the print server. The orange Status light
and the yellow Data light go on. After a while, the green or
orange Status light turns on and the Data light flashes.
8. To print a status sheet, press the status sheet button on the
print server. Press the status sheet button once to print a
simple status sheet, or twice to print a full status sheet.
If the status sheet prints, this indicates the print server has
been set correctly.
c
Caution:
❏
Do not press the status sheet button while the orange
Status light and the yellow Data light are on; otherwise,
the print server will return to its factory default settings,
and the network status sheet will not print correctly as
well.
❏
After turning off the printer, wait until the status lights
go off before turning it back on or before removing the
print server; otherwise, the print server may not work
correctly.
Note for Mac OS X 10.2.4:
Since the printer supports Rendezvous and is on by default, you can use
the printer on a network just by connecting it to the network. If you want
to disable the Rendezvous setting, use EpsonNet WebAssist. See
“Configuring the Print Server Using EpsonNet WebAssist” on page
202 for details.
Now, you can configure the print server for the network using
EpsonNet WinAssist/MacAssist. Go to “Installing EpsonNet
WinAssist/MacAssist” on page 34.
