Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) User Manual Download Page 170

Page: 170 / 266

158

Settings for NetWare Server

R4CB110
User’s Guide

Rev.C

SETNW.fm

A5 size

8/21/03

Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee

Setting the printer on client workstations

After configuring the print server, set up the printer on client
workstations.

Installing printers automatically

1. Run the Novell Printer Manager from Windows. If you are

running Windows Me/98/95/2000/NT, run:

\PUBLIC\WIN32\NWPMW32.EXE

2. In the Novell Printer Manager dialog, select

New

from the

Printer menu.

3. Click

Add

. A list of available printers appears.

4. Select the printer you want and click

Install

The Novell Printers---Install dialog appears. You may modify
the printer name that appears and select a pre-defined
configuration.

5. Click

. The printer driver for that printer model is installed

automatically from the Resource Management Service.

6. Click

. The printer appears in the main Printer Manager

window and is available for print jobs.

Installing printers manually

1. Install the printer driver.

2. Change the

Ports

on the printer’s properties dialog box.

Specify the following objects for the port.

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)











































































































































































































































































Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands

Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server), User Manual

Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands