Epson C11CH71202 User Manual Download Page 288

Page: 288 / 350

288

• If you are using a Wi-Fi Direct connection that suddenly disconnects, the Wi-Fi direct password on

your device may have been changed. If necessary, delete the existing

DIRECT-xxxxxxxx

connection

settings from your device and enter a new password. See your device documentation for instructions.

Parent topic:

Solving Network Problems

Related concepts

Wi-Fi Direct Mode Setup

Related topics

Wi-Fi or Wired Networking

Network Software Cannot Find Product on a Network

If EpsonNet Setup cannot find your product on a network, try these solutions:

• Make sure your product is turned on and connected to your network. Verify the connection using your

product control panel.

• Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non-

ASCII characters.

• Print a network connection report and check the codes and messages on the report to help determine

the cause of the problem.

• Make sure your product is not connected to a guest network.

• If necessary, reinstall your product software and try running EpsonNet Setup again:

1. Reset your product's network settings to their factory defaults.

Windows only:

Uninstall your product software.

3. Restart your router following the instructions in your router documentation.

Note:

If you are reading these instructions online, you will lose your Internet connection when you

restart your router, so note the next step before restarting it.

4. Download your product software from the Epson website using the instructions on the

Start Here

sheet.

• If you have replaced your router, reinstall your product software to connect to the new router.

Summary of Contents for C11CH71202































































































































































































































































































































































Search results

Summary of Contents for C11CH71202

Reviews:

Related manuals for C11CH71202

Brands by name

Popular brands

Epson C11CH71202, User Manual

Search results

Summary of Contents for C11CH71202

Reviews:

Related manuals for C11CH71202

Brands by name

Popular brands