Printing cannot start because the previous job is being
processed. Try again after a few seconds.
Print Overrun
The required time to process the print data exceeded the
print engine speed because the current page is too
complex. Press the
OK
button to resume printing, or
cancel the print job. To cancel the print job, see
“Cancelling a Print Job” on page 62
. If this message
appears again, select
On
as the
Page Protect
setting in
the control panel’s
Setup Menu
.
If you continue to receive this message when printing a
particular page, try simplifying the page by limiting the
number of graphics or reducing the number and size of
fonts.
RAM CHECK
The printer is checking the RAM.
Ready
The printer is ready to receive data and print.
Reboot to apply settings
You selected
No
when
Do you want to reboot to
apply the settings?
was displayed. To clear this
warning message, select
Clear Warning
from the
control panel’s
Reset Menu
.
Recovery Mode
Because the firmware update failed, the printer started
in recovery mode. Use the steps below to try to update
the firmware again.
1. Connect the computer and the printer with a USB
cable (network connections cannot be done for updates
during recovery mode).
2. Download the newest firmware from the Epson web
site, and then update.
Replace Feed Roller C1,
Replace Feed Roller C2,
Replace Feed Roller C3
(AL-M320DN only)
The indicated feed roller has reached the end of its
service life and needs to be replaced. Press the
OK
button to clear this error.
Replace Fuser
(AL-M320DN only)
The fuser has reached the end of its service life and needs
to be replaced. If this error occurs, consult your dealer.
Replace Maintenance Unit A,
Replace Maintenance
Unit B
The indicated maintenance unit has reached the end of
its service life and needs to be replaced. Press the
OK
button to clear this error.
Replace Toner Cartridge
The toner cartridge has reached the end of their service
life and needs to be replaced.
For details about replacement, see the instructions that
come with the toner cartridge.
Reserve Job Canceled
The printer cannot store the data of your print job using
the Reserve Job function. The maximum number of
print jobs stored on the printer’s memory has been
reached, or the memory has no more memory available
to store a new job. To store a new print job, delete a
previously stored job. Also, if you have any Confidential
Job stored, printing those jobs will make more memory
available.
You may also increase the available memory space by
changing the
RAM Disk
setting to
Normal
or
Maximum
.
For details, see
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
Reset All
All printer’s interface has been reset and the buffer has
been cleared. The printer reboots automatically.
Reset to Save
A control panel menu setting was changed while the
printer was printing. Press the
OK
button to clear this
message. The setting will become effective after printing
has finished.
Alternatively you can clear this message by performing
Reset All
on the control panel. However, the print
data will be deleted.
ROM CHECK
The printer is checking the ROM.
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Troubleshooting
75
