Item
Explanation
Buffer Size
Determines the amount of memory to be used for receiving data and printing data.
Note:
❏
To activate Buffer Size settings, you must turn off the printer for more than five
seconds then turn it back on. Or, you can perform a Reset All operation, as
explained in
Reset Menu
.
❏
Resetting the printer erases all print jobs. Make sure the
Ready
light is not
flashing when you reset the printer.
Settings (default in bold):
Normal
, Maximum, Minimum
Network Menu
See the
Network Guide
for each setting.
Note:
❏
In order to do IP address settings for AL-M220DN’s first setup, you must install EpsonNet Config for Windows or
for Mac OS X. Note that you cannot do IP address settings using EpsonNet Config on a web browser for the first
setup. For details, see the IP Address and Password Setup Sheet, and Network Guide.
❏
After any item in the menu is changed, the setting takes effect after a warm boot or after the power is turned on
again. While it is reflected in the Status Sheet, the actual change takes effect after a warm boot or after the power is
turned on again.
Energy Saver Menu
Note:
To use EpsonNet Config with a web browser to do settings, access
Configuration
>
Common Settings
>
Energy Saver
Menu
.
Item
Explanation
Time to Sleep(Auto)
When this setting is set to
Enable
, the printer automatically determines the time to enter
the sleep or deep sleep mode, based on the operation history of the printer. Note if
Enable
is selected, the
Time to Sleep
and Eco Fuser settings are ignored.
Settings (default in bold):
Enable,
Disable
Time to Sleep
Specifies the length of the time until the printer enters the sleep mode or deep sleep mode
if there are no button operations and no jobs to be printed.
Settings (default in bold):
1Min
, 3Min, 5Min, 15Min, 30Min, 60Min, 120Min
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Getting to Know Your Printer
25