Epson Advanced Printer Driver for TM Series Ver.3.04 Installation Manual Download Page 27

Page: 27 / 62

Rev.B

APD Installation and Setup

2-9

Advanced Printer Driver Installation Manual

The setting items are as follows.

❏

Printer Setting

Set Default Printer

Check when configuring the printer as that normally
used from the Windows applications.

Name

The printer driver name. This is changeable.

❏

Printer Port Setting

Transmission Retry(seconds) The time interval for retrying transmission after

timeout.
The default is "10."

❏

Port Type

Selects the interface connecting the computer and printer, to which the configured
settings apply. The default is "LPT" (Parallel).

The available settings for each type of port are as follows.

• Parallel

Select the parallel port to be used.

• Serial

Port

Select the COM port to be used.
The default is "COM1."

BaudRate

Sets the BaudRate. The default is "38400."

DataBits

Sets the DataBits. The default is "8."

Parity

Sets the Parity. The default is "None."

StopBits

Sets the StopBits. The default is "1."

FlowControl

Sets the data flow control type to be used between the
computer and serial device.
The default is "DTR/DSR."

• USB

There are no items to configure.

• TCP/IP

IP Address

Enter the printer IP address.

Summary of Contents for Advanced Printer Driver for TM Series Ver.3.04































































Search results

Summary of Contents for Advanced Printer Driver for TM Series Ver.3.04

Reviews:

Related manuals for Advanced Printer Driver for TM Series Ver.3.04

Brands by name

Popular brands

Epson Advanced Printer Driver for TM Series Ver.3.04, Installation Manual

Search results

Summary of Contents for Advanced Printer Driver for TM Series Ver.3.04

Reviews:

Related manuals for Advanced Printer Driver for TM Series Ver.3.04

Brands by name

Popular brands