Epson Aculaser C9200N, Service Manual

Page: 333 / 441

EPSON AcuLaser C9200N Revision D
MAINTENANCE Cleaning 333
Confidential
†
PH window
1. Open the Front Door.
2. Remove the PH window cleaning jig.
3. Insert the PH window cleaning jig to the cleaning port and clean it by putting
the jig back and forth a couple times.
Clean every PH window of YMCK.
Figure 6-2. Cleaning the PH window
†
Transfer belt
Using a dried soft cloth, wipe the Transfer belt.
Figure 6-3. Cleaning the Transfer belt
†
Registration roller
Using a soft cloth dampened with alcohol, wipe the registration roller.
Figure 6-4. Cleaning the Registration roller
40 38 F2C54 7 DA
40 38 F2C54 8 DA
Cleaning jig
Cleaning jig
Cleaning port
„
If it is difficult to clean with dried soft cloth, dampen a soft cloth
with a solvent.
„
Do not wipe out with water.
„
When solvent is used to dampen a cloth, do not use the ones
other than shown below:
Isopropyl alcohol, Ethyl alcohol, PPC Cleaner, Sol mix AP-7.
Registration roller