background image

1

Color Laser Printer

All rights reserved. No part of this publication may be reproduced, stored in a retrieval 
system, or transmitted in any form or by any means, mechanical, photocopying, recording, 
or otherwise, without the prior written permission of Seiko Epson Corporation. No patent 
liability is assumed with respect to the use of the information contained herein. Neither is 
any liability assumed for damages resulting from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this 
product or third parties for damages, losses, costs, or expenses incurred by purchaser or third 
parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, 
repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with 
Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems 
arising from the use of any options or any consumable products other than those designated 
as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

NEST Office Kit Copyright © 1996, Novell, Inc. All rights reserved.

IBM and PS/2 are registered trademarks of International Business Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United 
States of America and other countries.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.

EPSON and EPSON ESC/P are registered trademarks and EPSON AcuLaser and EPSON 
ESC/P 2 are trademarks of Seiko Epson Corporation.

Coronet is a trademark of Ludlow Industries (UK) Ltd.

Marigold is a trademark of Arthur Baker and may be registered in some jurisdictions.

CG Times and CG Omega are trademarks of Agfa Monotype Corporation and may be 
registered in certain jurisdictions.

®

Summary of Contents for AcuLaser C9100























































































































































































































































































































































































































































Reviews: