253
8. Press the
Down button several times to display
Color
Regist Menu
, then press the
Enter button.
9. Press the
Down button several times to display the color
you need to adjust, then press the
Enter button.
For example, to adjust the cyan registration, press the
Down button several times until the LCD panel displays
C=Lx, Cx, Rx
, then press the
Enter button.
Note:
Y
,
M
, and
C
displayed in the LCD panel indicate Yellow, Magenta,
and Cyan, respectively.
10. Set the values for the colors (Yellow, Magenta, and Cyan)
measured in Chart A.
For example, to enter the value for Cyan at “Left,” press the
Down button several times to enter the value measured
in Chart A. After setting the value for
L
(Left), press the
Enter button, and set the value for
C
(Center) with the same
procedure. Then, set the value for
R
(Right) and press the
Enter button.
11. Repeat steps 9 and 10 to enter the values (Left, Center, and
Right) for
M
(Magenta).
12. Repeat steps 9 and 10 to enter the values (Left, Center, and
Right) for
Y
(Yellow).
13. After the adjustment is complete, press the
Start
button to exit
the control panel menus.
14. Repeat steps 2 to 4 to print a Color Registration Adjustment
Sheet for confirmation.
If all values are zero in Chart A, adjustment is complete.
Otherwise, repeat steps 7 to 14.
Summary of Contents for AcuLaser C9100
Page 317: ...317 ...
