Epson AcuLaser C900 Reference Manual Download Page 162

Page: 162 / 276

162

Replacing Consumable Products

Handling precautions

Always observe the following handling precautions when
replacing the waste toner collector.

❏

Do not reuse toner found in the waste toner collector.

Warning:

❏

Keep the waste toner collector out of the reach of children.

❏

Do not dispose of used waste toner collector in fire, as it may
explode and cause injury. Dispose of it according to local
regulations.

Replacing the waste toner collector

Follow these steps to replace the waste toner collector.

1. Open the front cover.

Summary of Contents for AcuLaser C900





















































































































































































































































































Search results

Summary of Contents for AcuLaser C900

Reviews:

Related manuals for AcuLaser C900

Brands by name

Popular brands

Epson AcuLaser C900, Reference Manual

Search results

Summary of Contents for AcuLaser C900

Reviews:

Related manuals for AcuLaser C900

Brands by name

Popular brands