Epson AcuLaser C1900, Service Manual

Page: 158 / 270

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Troubleshooting Status Display (AcuLaser C900) 158
CONSUMABLES NEAR END OF SERVICE LIFE
(STATUS CODE: 2017~2031, 2010, 2011, 2563)
†
Description
These warnings indicate that consumables must be replaced soon.
The toner related warnings also indicate which of CMYK toners must be replaced.
The warnings related to consumables are cleared when no more states of end or
near end are detected. The ResetFlag command of the ESCPAGES-02 protocol
also clears the warnings.
However, the function to clear the warnings for consumables from the EPSON
Status Monitor is not supported.
Each consumable can be used until the status changes to replace error, but it is
desirable to replace it when these warnings appear.
†
Remedy
After printing, the EPSON Status Monitor pop-up appears, and this display
disappears when the [Close] button is clicked or consumables are replaced.
“Other warnings = OFF” can be selected in the Monitoring Preferences settings of
the EPSON Status Monitor.
†
Warning time of consumables and fixed replacement parts
„
CMYK Toner Cartridge
The amount of toner used is more than 80% or the service life counter
becomes 6400, whichever is reached first.
„
Photoconductor
The amount used is more than 86%.
„
Waste T Box
The engine sensor detects that the toner is near its end (the service life means
200 image life remaining).
„
Fuser Unit
Use exceeding the designed life does not result in damage to the printer
mechanism. Therefore, use without occurrence of “near end” is 98% or above.
„
Transfer Belt
The amount used is more than 96%.