Epson AcuLaser C1900, Service Manual

Page: 70 / 270

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Control Panel 70
†
Color calibration description
NOTE: This function will be realized in the Utility for Adobe PS3 kit.
This indicates G: Increase Graduation, D: Increase Definition, 600: 600 dpi, and C:
Coated, also means 600 dpi and the calibration data for Increase Graduation depending
on the combination, and is displayed only when the calibration data is registered in the
EEPROM.
This indicates MMMM: Month, DD: Day, YYYY: Year, HH: Hour, and MM: Minute
of the date and time when the calibration table is created.
EPSON
†
(Logo)
EPSON AcuLaser C1900
SEIKO EPSON CORPORATION
Status Sheet
Information Part Numbers
Developer Cartridge Cyan E
„„„„
F S050099
Developer Cartridge Magenta E
„„„„
F S050098
Developer Cartridge Yellow E
„„„„
F S050097
Developer Cartridge Black E
„„„„
F S050100
Photoconductor Unit E
„„„„
F S051083
Transfer Unit E
„„„„
F S053009
Waste Toner Collector S050101
Total Pages 456
Color Pages 400
B/W Pages 56
Default Settings
Tray Manu Setup Menu AUX Menu ESCP2 Menu
MP Tray Size = A4 Lang = English AUX I/F = On Font = Courier
LC Size = A4 Timeout = 60 AUX Config = No Pitch = 10cpi
MP Type = Plain Paper Source = Auto Buffer Size = Normal Condensed = Off
LC Type = plain MP Mode = Normal T.Margin = 0.50inch
Manual Feed = Off LJ4 Menu Text = 66Lines
Emulation Menu Copies = 1 FontSource = Resident CGTable = PcUSA
Parallel = Auto Duplex = Off Font Number = 0 Country = USA
USB = Auto Binding = Long Edge Pitch = 10.00cpi Auto CR = On
Network= Auto Start Page = Front SymSet = IBM-US Auto LF = Off
AUX = Auto Paper Type = Normal Form = 64Lines Bit Image = Dark
Page Side = Front Source SymSet = 277 ZeroChar = 0
Printing Menu Skip Blank Page = Off Dest SymSet = 277
Page Size = A4 Auto Eject Page = Off CR Function = CR FX Menu
Wide A4 = Off Size Ignore = Off LF Function = LF Font = Courier
Orientation = Port Auto Cont = Off Tray Assign = 4K Pitch = 10cpi
RITech = On Page Protect = Auto Condensed = Off
Toner Save = Off LCD Contrast = 7 GL2 Menu T.Margin = 0.50inch
Image Optimum = Auto GL Mode = LJ4GL2 Text = 66Lines
Top Offset = 0.0mm Parallel Menu Scale = Off CGTable = PcUSA
Left Offset = 0.0mm Parallel I/F = On Origin = Corner Country = USA
T Offset B = 0.0mm Speed = Fast Pen = Pen0 Auto CR = On
L Offset B = 0.0mm Bi-D = ECP End = Butt Auto LF = Off
Buffer Size = Normal Join = Mitered Bit Image = Dark
Pen0 = 0.35mm ZeroChar = 0
USB Menu Pen1 = 0.35mm
USB I/F = On I239X Menu
Buffer Size = Normal PS3 Menu Font = Courier
Error Sheet = Off Pitch = 10cpi
Network Menu Coloration = Color Code PAge = 437
Network I/F = On Image Protect = Off T.Margin = 0.40inch
Network Config = No Text = 67Lines
Get IPAddress = Auto Auto CR = On
IP = xxx.xxx.xxx.xxx Auto LF = Off
SM = xxx.xxx.xxx.xxx Alt.Graphics = Off
GW = xxx.xxx.xxx.xxx Bit Image = Dark
Buffer Size = Normal ZeroChar = 0
CharacterSet = 2
Hardware Configuration
Installed Memory 64_MB (65536KB) Other Options
Available Memory 58.3_MB (59774KB) Lower Cassette
Firmware Revision xxxxx Duplex Unit
Font Data Revision xxxxx Hard Disk 5.5_GB
Installed Emulation LJ4,GL2
ESC/Page-Color
ESCP2,FX,I239X
Installed Interface Parallel
USB
Network
AUX
IAxxxxAxxxxJxxxxxxICx x x x16PxxxxxxxxxxxxxxxxFMCxxxxxxx