4. Check if the printer to be installed is listed in the
Select Printer
screen, and then click
Next
.
Note:
If the printer to be installed is not listed in the
Select Printer
screen, try the following steps:
❏
Click
Refresh
to update the information.
❏
Click
Manually add using IP address
, and then enter the details of the printer manually.
5. Configure the required items on the
Enter Printer Settings
screen, and then click
Next
.
6. Select the software to be installed, and then click
Install
.
The “Congratulations!” screen appears.
7. Click
Finish
to exit this tool.
The wireless configuration is complete.
When the
WPS-PIN
operation is successful and the printer is rebooted, wireless LAN connection is
completed.
WPS-PBC
Note:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register
devices required for wireless configuration, by pressing the button provided on the access point via
wireless routers, and then performing WPS-PBC setting on the operator panel. This setting is available
only when the access point supports WPS.
1. Select
WPS-PBC
, and then click
Next
.
2. Follow the instructions until the
Check Setup
screen appears.
3. Confirm there are no errors displayed on the LCD panel, and then click
Start Installation
.
Epson AcuLaser C1750 Series User’s Guide
Network Basics
57