Print Quality Problems
Note:
In this section, some procedures use the Printer Setting Utility or Status Monitor. Some procedures that
use the Printer Setting Utility can also be performed using the operator panel.
See also:
❏
“Understanding the Printer Menus” on page 132
❏
“Printer Setting Utility (Windows Only)” on page 21
❏
“Status Monitor (Windows Only)” on page 22
The Output Is Too Light
Problem
Action
The output is too light.
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1. Check the toner level in the
Status
tab in the Status Monitor window.
2. Replace the toner cartridges as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
See also:
“Usable Print Media” on page 93
Try changing the
Paper Type
setting in the print driver.
1. On the
Paper / Output
tab in
Printing Preferences
of the print driver, change
the
Paper Type
setting.
Disable
Draft Mode
in the print driver.
1. On the
Advanced Settings
tab in
Printing Preferences
of the print driver,
ensure that the
Draft Mode
check box is not selected.
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting
164
