5. Select the custom setup you want to define from
Details
.
6. Specify the length of the short edge and long edge under
Settings for
. You can specify the values
either by entering them directly or using the up arrow and down arrow buttons. The length of the
short edge cannot be longer than the long edge, even if it is within the specified range. The length of
the long edge cannot be shorter than the short edge, even if it is within the specified range.
7. To assign a paper name, select the
Name Paper Size
check box, and then enter the name in
Paper
Name
. Up to 14 characters can be used for the paper name.
8. If necessary, repeat steps 5 to 7 to define another custom size.
9. Click
OK
twice.
Printing on Custom Size Paper
Use the following procedures to print using either the Windows or Mac OS X print drivers.
Using the Windows Print Driver
This section explains the procedure using Windows XP WordPad as an example.
Note:
The way to display the printer
Properties
/
Printing Preferences
dialog box differs according to the
application software. Refer to the manual of your respective application software.
1. From the
File
menu, select
.
2. Select the printer as the printer to be used and click
Preferences
.
3. Select the
Paper/Output
tab.
4. Select the size of the original document from
Paper Size
.
5. Select the appropriate paper type from
Paper Type
.
6. Click the
Layout
tab.
7. From
Fit to New Paper Size
, select the custom size you defined. If you have selected the custom
size from
Paper Size
in step 4, select
Same as Paper Size
.
8. Click
OK
.
Epson AcuLaser C1750 Series User’s Guide
Printing Basics
123
