Non Genuine Toner Mode
When toner within a toner cartridge is end of its service life, the
Replace XXXX Cartridge
or
Empty
XXXX Cartridge
(
XXXX
:
Yellow
,
Magenta
,
Cyan
, or
Black
) message appears.
When you want to use the printer in the Non Genuine Toner mode, enable the Non Genuine Toner
mode and replace the toner cartridge.
Important:
If you use the printer in the Non Genuine Toner mode, the performance of the printer may not be at its
optimum. And any problems that may arise from the use of the Non Genuine Toner mode are not
covered by our quality guarantee. The continuous use of the Non Genuine Toner mode can also cause the
printer to break down, and any repair charges for such break down will be incurred by users.
Note:
To disable the Non Genuine Toner mode, select
Off
for
Non-GenuineToner
on the operator panel or
deselect the check box next to
On
on the
Non Genuine Toner
page on the Printer Setting Utility.
The Operator Panel
Note:
Before starting the operation described below, confirm that
Ready
is displayed on the LCD panel.
1. Press the
(
Menu
) button.
2. Select
Admin Menu
and then press the
button.
3. Select
Maintenance Mode
and then press the
button.
4. Select
Non-GenuineToner
and then press the
button.
5. Select
On
and then press the
button.
6. Press the
button until the top page is displayed.
The printer switches to the Non-GenuineToner mode.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting
194
