Problem
Action
The printed result is foggy.
When the whole is printed light, contact the Epson local representative office or an
authorised dealer.
When the printed page is partly light, start
Developer Stir Mode
.
1. Launch the Printer Setting Utility, and click
Developer Stir Mode
on the
Diagnosis
tab.
2. Click the
Start
button.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Bead-Carry-Out (BCO)
Problem
Action
Bead-Carry-Out (BCO) is happening.
If the printer is installed in a high altitude location, set the altitude of the location.
1. Launch the Printer Setting Utility, and click
Adjust Altitude
on the
Printer
Maintenance
tab.
2. Select the value close to the altitude of the location where the printer is installed.
3. Click the
Apply New Settings
button.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting
170
