Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any pieces of media left in
the printer, whether large or small, can obstruct the media path and cause further misfeeds. Do not
reload media that has misfed.
Note:
The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner
may stick to your hands, so be careful not to touch the print face when removing the misfed media. Make
sure not to spill any toner inside the printer.
c
Caution:
❏
Unfused toner can mess your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets on
your skin, wash it off with cool water and a mild soap.
❏
If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel persists, open and close
the printer’s covers. This should clear the misfeed message.
Clearing Procedures
1. Open the top cover.
Note:
If there is paper in the output tray, remove it, and then fold up the output tray before opening the top
cover.
AcuLaser C1600 User’s Guide
Troubleshooting
73
