Transfer Power—Adjust the 2nd transfer voltage for each media type. If there are cracks in solid parts
of the image, move the setting in the + direction.
If small white dots appear in halftones, move the setting in the - direction.
Service’s Choice
❏
GDI Timeout—Specifies the amount of time until communication with the printer times out.
❏
Energy Save—Specifies whether or not the Energy Save mode is enabled. The length of time
until the machine enters Energy Save mode can be specified from the Panel tab.
Note:
This menu is displayed only on the Americas model.
Flicker—Select a mode for preventing flickering of the fluorescent lamp, depending on the power
source.
0: Prevents flickering automatically
1: Normally prevents flickering
2: Does not prevent flickering
Image Adj Param—Use when print quality is reduced in environments such as high altitudes.
0: Used at standard elevations
1: Used at medium-high elevations
2: Used at high elevations (about 2,000 m)
3: Used at extremely high elevations
Image Refresh—Use when thin white horizontal lines appear at intervals on images.
Note:
The Image Refresh function consumes toner.
Print Pattern 1, Print Pattern 2—Prints a test pattern so the print result can be checked.
A black-and-white test pattern can be printed with “Print Pattern 1”, and a color test pattern can be
printed with “Print Pattern 2”.
AcuLaser C1600 User’s Guide
Remote Panel Program
23
