Epson ActionPrinter 3250 Network Manual Download

Page: 119 / 133

Macintosh environment

Printers do not appear in Chooser.

Cause

What to do

You may have selected a wrong one for
“Connect via” in the

AppleTalk

Control

Panel.

Make sure to select

Ethernet

AppleTalk

Control Panel, and make

sure

AppleTalk

is active in Chooser. Also, check the network

equipment including the hub cable.

The Bonjour/Rendezvous printer setting is overwritten by the AppleTalk printer setting.

Cause

What to do

The same printer is set up with AppleTalk
after the printer is set up with Bonjour/
Rendezvous.

Change the AppleTalk printer name so that it does not conflict with
the Bonjour/Rendezvous printer name.

NetWare environment

For users of printers supporting NetWare queue-based printing

Nothing prints even though clients have sent data to the printer.

Cause

What to do

Clients may not be registered, or the
network interface may not be logged in to
the NetWare server.

Make sure clients are registered as users of the print queue and the
print server. Also, make sure the network interface is logged in to the
NetWare server.

EpsonNet Config will not start correctly.

Cause

What to do

Microsoft NetWare Directory Service is
installed on your computer.

If you are using the NDS service, install the Novell NetWare Client
service.

EPSON Network Guide

Troubleshooting

119

Summary of Contents for ActionPrinter 3250






































































































































Search results

Summary of Contents for ActionPrinter 3250

Reviews:

Related manuals for ActionPrinter 3250

Brands by name

Popular brands

Epson ActionPrinter 3250, Network Manual

Search results

Summary of Contents for ActionPrinter 3250

Reviews:

Related manuals for ActionPrinter 3250

Brands by name

Popular brands