Note:
❏
Announce the share name to your clients so that they know the share name of the printer
they want to use.
❏
If the Add Printer wizard prompts you to select either
Keep existing driver
or
Replace
existing driver
, be sure to select the
Replace existing driver
radio button.
8. Click
Finish
and follow the on-screen instructions to complete the setup.
Using the NET USE command
If you are running Windows Vista/XP/Server 2008/Server 2003/2000/NT 4.0 and using NetBIOS
to connect to the device, we recommend that you use the NET USE command, as follows:
1. Check that the following services are installed.
Right-click the
Network Neighborhood
icon on the desktop and select
Properties
. Click the
Services
tab and check that
Server
or
Workstation
is listed.
2. If it is not installed, click
Add
.
3. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network interface\Device name of network interface
Selecting the port
1. Click
Start
, point to
Settings
, and then select
Printers
.
2. Right-click the printer icon and then select
Properties
.
3. Click the
Ports
tab and then select the port you have set with the NET USE command.
Macintosh
Follow the steps below to set a printer.
Note:
Make sure that the printer driver is installed on your Macintosh before following the steps below. See
the manual shipped with your printer for instruction on how to install the printer driver.
EPSON Network Guide
How To
69
