The following table lists the components required for configuring the network interface with
EpsonNet Config.
EpsonNet Config’s setting screens
Necessary components
TCP/IP, AppleTalk, IPP, SNMP (IP trap)
Internet Protocol (TCP/IP)
MS Network
Internet Protocol (TCP/IP)
NetWare, SNMP (IPX trap)*
Latest Novell Client downloaded from the Novell Web site
* Only for printers supporting NetWare queue-based printing
The following table lists the components required for network printing.
Printing method
Necessary components
LPR or Internet printing
Internet Protocol (TCP/IP)
Microsoft Network Shared printing
TCP/IP or NetBEUI
Client for Microsoft Networks
Printing via NetWare server
Latest Novell Client downloaded from the Novell Web site
5. If the necessary components are not in the list, click
Install
to install them, as described below.
For LPR or Internet printing:
Internet Protocol (TCP/IP)
is installed by default. You cannot add or delete it.
For Microsoft Network Shared printing:
Select
Client
and then click
Add
. Select
Client for Microsoft Networks
and then click
OK
.
For printing via NetWare server:
Download the latest Novell Client from the Novell Web site and install it on the computer.
Also, be sure to install either IP or IPX. See the Novell Web site for detailed information.
6. For LPR, Internet, Microsoft Network Shared printing:
Double-click
Internet Protocol (TCP/IP)
on the Local Area Connection Properties dialog box
to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet
mask, etc. and then click
OK
.
7. Restart the computer.
The necessary components are now installed. Go to the section “Connecting the Network Interface
to the Network” on page 35.
EPSON Network Guide
How To
25
