Epson ActionPrinter 3250 Network Manual Download

Page: 122 / 133

Note:

❏

You cannot print a status sheet in the following cases: the printer has started printing, it is offline,
or it is not ready to print.

❏

See the User’s Guide for more information on the printer’s control panel.

Initializing Your Printer

To initialize your printer, turn on the printer while pressing the

Cancel Job

button on the

printer’s control panel.

Note:

Some printer models do not support this function.

Caution:

Note that all changes made to the printer and network settings are cleared when you initialize
the printer using this method. Therefore, do not initialize your printer except in the case you
forget the EpsonNet Config password.

Reformatting the Hard Disk Drive

To reformat the Hard Disk Drive, follow the instructions below.

Note:

Some printer models do not support this function.

1. Make sure the printer is turned off.

2. Hold down the

Down

button while you turn on the printer.

3. When you see the message

Support Mode

on the LCD panel, select

HDD Format

in the

support menu.

Note:

❏

After reformatting the Hard Disk Drive, the printer will automatically reboot.

❏

When you want to erase only the fonts installed from the Adobe PostScript 3 (PS3), follow steps 1
through 3 above. Select

PS3 HDD Init

when the Adobe PostScript 3 ROM is installed.

❏

When installing a Hard Disk Drive from a different printer, reformat it with this function.

EPSON Network Guide

Troubleshooting

122

Summary of Contents for ActionPrinter 3250






































































































































Search results

Summary of Contents for ActionPrinter 3250

Reviews:

Related manuals for ActionPrinter 3250

Brands by name

Popular brands

Epson ActionPrinter 3250, Network Manual

Search results

Summary of Contents for ActionPrinter 3250

Reviews:

Related manuals for ActionPrinter 3250

Brands by name

Popular brands