Epson ActionPC 6000, User Manual

Page: 23 / 144

Now you need to run the SETUP program to make sure your
computer is configured properly. First turn off the computer, as
described below, then see Chapter 2 for instructions. When you
finish running SETUP, see “Post-SETUP Procedures” on
page 2-15 for guidelines on what to do next.
Turning Off the Computer
Whenever you turn off your system, follow these steps:
1. Save your data, exit any application programs, and exit
Windows, if you are running it.
2. Check the hard disk drive light and the diskette drive light(s)
to make sure they are not on. Don’t turn off the computer if
one of these lights are on because you could damage the
drive or lose data.
3.
Remove any diskette(s) from the diskette drive(s),
4. Press the power button to turn off the computer.
5.
Turn off the monitor, printer, and any other peripheral
devices.
Setting Up Your System 1-9