Epson Action Scanner II, User Manual

Page: 172 / 299

Paper Handling
The printer prints a page and then stops.
The display reads PAPER SIZE ERROR and the CONTINUE light
flashes.
You may
have
selected the wrong paper size with your
application software. Check the paper size setting in your
software.
You may be trying to use a non-standard paper size (one that is
not listed on the P-SIZE menu in SelecType Level 1). You
may
be
able to feed this paper manually as described in Chapter 5. Be
sure
to
use only paper sizes that are within the specified range
listed in Chapter 8.
The paper size currently set with P-SIZE may
not
match your
paper size. There are several ways of dealing with this error: if
the
FEED
light is out, simply press
CONTINUE
to clear the error.
Then press the
SelecType
button to enter SelecType Level 1. Make
sure
that
the correct paper cassette is selected and that the paper
size you wish to use matches the P-SIZE setting. If it does not,
change the P-SIZE setting and save the new setting with the
SYSTEM CONFIG option SAVE MACRO setting.
If the
FEED
light is on, indicating that data remains in the printer,
you cannot change SelecType settings. However, you can still
enter SelecType Level 1 and check the INPUT and P-SIZE
settings. If you are using an incorrect paper size, simply replace
it with the size indicated in P-SIZE and continue printing. If the
SelecType settings are incorrect, you need to press
RESET
to clear
the data in the printer. Next, enter SelecType Level 1 and change
the paper-size setting to match the size of the paper you are
using. Save the new setting with the SYSTEM CONFIG option
SAVE MACRO setting and continue with your printing. For
more information on using SelecType, see Chapter 4.
Troubleshooting 7-27