Epson Action Scanner II User Manual Download

Page: 150 / 299

Status and Error Messages

[E] PAPER OUT [paper source] [paper size]

There is no paper in the paper source from which

the

printer

expects to feed paper. The right column of the display prompts

you to load the correct paper size into the paper source.

[E] PAPER SIZE ERROR

The paper size you selected with SelecType (or the default size if

you have

not

selected

size) does

not match

the paper loaded in

the selected paper source. Press

CONTINUE

to clear the error.

Insert the correct paper or

change the

P-SIZE setting with your

application software or with SelecType as described in

Chapter 4.

[S] PRINTING

The printer

has

received data and is printing.

[S] PRINT STOP

The printer stops printing during a multi-copy print operation.

[S] RAM Check X.X MB

The printer is checking RAM (X.X = capacity).

[S] READY

The printer is ready to print.

[E] REINSERT CARD

If this message appears

the display, you may

have

removed

an identity card or a font cartridge while the

FEED

light was still

lit or while the printer was on line. To correct the error, make

sure

the

printer is off line. Next, reinsert the card or cartridge and

press

CONTINUE.

REMOVE CARD

You

may

have inserted an identity card or a font cartridge while

the printer was on line or while the

FEED

light was on. To correct

this error, take the printer off line, then remove the card or

cartridge and press

CONTINUE.

Before reinserting the card or

cartridge, make sure that all data in the buffer has been printed

and

that

the printer is off line. If

the FEED

light is on, press

FEED

to print out the remaining data.

Troubleshooting 7-5

Summary of Contents for Action Scanner II












































































































































































































































































































Search results

Summary of Contents for Action Scanner II

Reviews:

Related manuals for Action Scanner II

Brands by name

Popular brands

Epson Action Scanner II, User Manual

Search results

Summary of Contents for Action Scanner II

Reviews:

Related manuals for Action Scanner II

Brands by name

Popular brands