Epson 7800 - Stylus Pro Color Inkjet Printer Printer Manual Download Page 19

Page: 19 / 176

1-19

Setting Up the Printer

2. Insert the right leg into the right base as shown. (Note that the bases are

labeled

and

) Use the included hex wrench to fasten the leg with the

two base bolts.

3. Assemble the left leg and base in the same way.

4. Attach the bottom horizontal strut as shown, then fasten it with one

collar and one strut bolt at each end. Make sure the bolts are tight.

Note:

Make sure you

tighten all bolts before
moving to the next
section.

Bolt holes

Underside view of base
showing location of bolt holes

Collar

Strut bolt

7800-9800Guide.book Page 19 Monday, April 10, 2006 11:59 AM

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

















































































































































































Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands