Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Page: 142 / 176

5-142
142 | Maintaining and Transporting the Printer
The icons show the percentage of space remaining in the tank as follows:
The Epson Stylus Pro 7800 has one maintenance tank (on the right side),
and the 9800 has two (one on either side). Replacement tanks are available
from Epson (part number C12C890191).
The printer will not print if one of the maintenance tanks is full. On the
Epson Stylus Pro 9800, the right tank is used more than the left. To
maximize tank life, you can switch the tanks when the right tank reaches
approximately 60% of capacity.
Follow these steps to replace the tank:
1. Make sure the printer is not printing or performing any other operations
(
READY
or
PAPER OUT
should appear on the LCD display).
2. If you have the Epson Stylus Pro 9800, check the LCD display to
determine which tank needs to be replaced (left or right).
3. Grasp the handle at the bottom of the tank (on the side of the printer)
and gently pull out the maintenance tank.
4. Place the used tank in the plastic bag included with the new tank.
5. Insert the new tank.
100–81% 20% to nearly full
80–61% Tank nearly full
60–41% Tank full
40–21% Tank error or no maintenance tank
Note: You can purchase
replacement items for
your printer from an
authorized Epson
reseller. To find the
nearest reseller, call
800-GO-EPSON
(800-463-7766). In the
U.S., you can also
purchase online at
www.epsonstore.com.
In Canada, you can also
purchase at
www. epson.ca or
800-807-7766.
Caution: Be careful not
to spill ink from the
maintenance tank when
removing it. Hold it upright
at all times and dispose of
it carefully.
7800-9800Guide.book Page 142 Monday, April 10, 2006 11:59 AM