Epson 7800 - Stylus Pro Color Inkjet Printer Printer Manual Download Page 135

Page: 135 / 176

5-135

Maintaining and Transporting the Printer

135

4. When

LOWER THE RIGHT INK LEVER

appears, lower the ink lever on

the right ink compartment. Repeat this step for the left ink
compartment.

5. When

RAISE THE RIGHT INK LEVER

appears, raise the ink lever on

the right ink compartment. Repeat this step for the left ink
compartment.

The printer starts charging ink. After a while, ink lever messages appear
on the LCD display.

6. When a message appears on the LCD display, raise or lower the ink

levers accordingly.

7. When

LOWER THE RIGHT INK LEVER AND CLOSE THE COVER

appears on the LCD display, lower the lever and close the cover. Then
repeat this step for the left ink lever and cover.

Updating the Printer Driver Information

After you have switched black ink modes, you need to update the driver
information. Follow the instructions for your operating system.

•

Mac OS X:

Check the ink status using the Epson Printer Utility,

following the instructions on page 97. Confirm that the correct black
cartridge is displayed.

•

Windows:

Access the printer driver as described on page 100. On the

Main tab, make sure that the correct ink cartridge is displayed.

If not, click the

Utility

tab and then the

Printer and Option

Information

button.

Select the cartridge you installed and click

Note:

After you switch to

Matte Black ink, you will
no longer see glossy
media types in your
printer driver. Only media
types that work with
Matte Black ink will
appear, for example:

7800-9800Guide.book Page 135 Monday, April 10, 2006 11:59 AM

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

















































































































































































Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands