Epson 7800 - Stylus Pro Color Inkjet Printer Printer Manual Download Page 129

Page: 129 / 176

5-129

Maintaining and Transporting the Printer

129

2. Press the ink compartment covers to open them.

3. Raise the ink levers to the unlocked position.

4. Remove the empty ink cartridge from the printer. It’s a good idea to save

your first set of empty cartridges so you can use them for transporting
the printer, if necessary.

WARNING:

Do not shake

the empty cartridge, or ink
may leak out. If ink gets on
your hands, wash them
thoroughly with soap
and water. If ink gets in
your eyes, flush them
immediately with water.

7800-9800Guide.book Page 129 Monday, April 10, 2006 11:59 AM

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

















































































































































































Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands