Epson 7800 - Stylus Pro Color Inkjet Printer Printer Manual Download Page 21

Page: 21 / 176

1-21

Setting Up the Printer

2. Remove the handles from the sides of the box as shown.

3. Lift the box up and away from the printer. Remove the ink cartridges

and other accessories from the side as shown below.

4. Make sure you have all the items shown below, in addition to the

printer:

Remove ink
cartridges and
accessories

Note:

The printer

includes a Photo Black
cartridge. If you prefer to
use Matte Black, the
Matte Black cartridge can
be purchased separately.
See page 128.

FireWire cable

Black Ink Conversion Kit

Spindle adapters

Paper guides

Power cord

Roll paper and spindle

Ink cartridges

7800-9800Guide.book Page 21 Monday, April 10, 2006 11:59 AM

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

















































































































































































Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands