Epson 7800 - Stylus Pro Color Inkjet Printer Printer Manual Download Page 43

Page: 43 / 176

1-43

Setting Up the Printer

Installing the Software for Macintosh

Follow the steps below to install the software on a Macintosh. For Windows,
see page 48.

1. Turn on your Macintosh and your printer.

2. Insert the printer software CD-ROM. If necessary, double-click the

Epson

CD-ROM to open its window.

3. Double-click the

Epson

installer icon. You see the Epson Installation

Program.

4. Double-click

Install Printer Driver for Stylus Pro 7800

Install

Printer Driver for Stylus Pro 9800,

depending on the printer you

have.

Note:

You can check for a

newer version of your
printer driver on the
Epson support site at
http://support.epson.com.

7800-9800Guide.book Page 43 Monday, April 10, 2006 11:59 AM

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

















































































































































































Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 7800 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands