Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 139

Page: 139 / 182

Maintenance

139

User’s Guide

Aligning the print head using the
control panel

Select

AUTO

to correct any head misalignment

automatically to obtain optimum printing results.
If you select

MANUAL

, you need to check the pattern

and enter the value for alignment.

Setting the paper type and paper
thickness

First, set the paper type and paper thickness of the
paper that is loaded in the printer.

Make sure that Epson special roll paper or
one sheet of A4/Letter size or larger paper
is loaded in the printer.

Make sure to set the paper correctly
according to the paper.

Press the

button to enter the Menu

mode.

Press the

button to select

HEAD

ALIGNMENT

, and then press the

button.

Press the

button to select

PAPER

THICKNESS

, and then press the

button.

Press the

button to select

SELECT

PAPER TYPE

, and then press the

button.

Press the

button to select the paper

type you set in the printer, and press the

button to select the paper. Then press the

button.

Press the

button twice.

Press the

button to select

SELECT

PAPER THICKNESS

, and then press the

button.

Press the

button to select a paper

thickness value between 0.1 and 1.5 mm,
and then press the

button.

See the following for the paper thickness.

“Paper Information” on page 110

To align the print head, see either of the
following section.

“Aligning the print head automatically”

on page 139

“Aligning the print head manually” on

page 140

Aligning the print head automatically

Press the

button to select

HEAD

ALIGNMENT

, and then press the

button.

Press the

button to select

ALIGNMENT

, and then press the

button.

Select

AUTO

, and press the

button.

Press the

button to select

BI-D

2-COLOR

, and then press the

button to

print the pattern.

The adjustment pattern for output is read
by the sensor and the optimum adjustment
value is registered automatically in the
printer.

If you are not satisfied with the result of this
alignment, press the

button to return to

the previous level, and then select

BI-D

ALL

If you are not satisfied with the result of the
BI-D ALL alignment, try

UNI-D

You can also align the print head
individually by selecting

BI-D #1

BI-D #2

BI-D #3

, or

BI-D #4

. Select an ink dot size

from BI-D #1 to BI-D #4 depending on the
media you use and the print mode you
want to try.

See “Ink dot size” on page 142.

Note:

You cannot use Plain Paper for automatic alignment.

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands