Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 150

Page: 150 / 182

Problem Solver

150

User’s Guide

LEVER RELEASED
LOWER THE PAPER SET LEVER

The paper lever is in
the released position.

Move the paper lever to the secured position.

LEVER RELEASED
LOAD PAPER

FRONT COVER OPEN
CLOSE FRONT COVER

The front cover is open.

Close the front cover.

INK COVER OPEN
CLOSE RIGHT AND LEFT INK
COVERS

The ink cover(s) is
open.

Close the ink cover(s).

INK COVER OPEN
CLOSE RIGHT INK COVER

INK COVER OPEN
CLOSE LEFT INK COVER

NOT ENOUGH CAPACITY
REPLACE THE RIGHT SIDE
MAINTENANCE TANK

The maintenance tank
is almost full.

Replace the target maintenance tank with a
new one.

See “Replacing the Maintenance Tank”

on page 127.

NOT ENOUGH CAPACITY
REPLACE THE CENTER REAR
MAINTENANCE TANK

NOT ENOUGH CAPACITY
REPLACE THE LEFT SIDE
MAINTENANCE TANK

NOT ENOUGH INK
REPLACE INK CARTRIDGE WITH A
NEW ONE

The ink cartridge is
nearly expended.

Replace the ink cartridge with a new one.

See “Replacing Ink Cartridges” on page

122.

MAINT TANK ERROR
REPLACE THE RIGHT SIDE
MAINTENANCE TANK

The maintenance tank
is not correctly set in
the printer.

Replace the maintenance tank.

See “Replacing the Maintenance Tank”

on page 127.

MAINT TANK ERROR
REPLACE THE CENTER REAR
MAINTENANCE TANK

MAINT TANK ERROR
REPLACE THE LEFT SIDE
MAINTENANCE TANK

MAINTENANCE
PLEASE USE GENUINE EPSON
MAINT TANK

Non-genuine
maintenance tank is
installed.

Replace the maintenance tank with a
genuine Epson cartridge.

See “Replacing the Maintenance Tank”

on page 127.

MAINTENANCE
NON-GENUINE MAINT TANK MAY
NOT PERFORM AT OPTIMUM.
CONTINUE?
<YES NO>

Non-genuine
maintenance tank is
installed.

Select

(press the

button) to replace the

maintenance tank with a genuine Epson
maintenance tank.

See “Replacing the Maintenance Tank”

on page 127.

Error messages

Description

What to do

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands